• John

TVR S1 - Removal of the Clutch Slave Cylinder

We remove the clutch slave cylinder on the TVR S1.

We did notice that the bleed nipple was fitted at the top, which would make the bleeding difficult, so we will reverse the position when we install the new slave cylinder.

A new copper pip has been ordered from which was £12.94 plus VAT/Delivery.

As the new cylinder is a Land Rover part, the thread on the new slave cylinder is 7/16" UNF. The new copper pipe should be with us in a few days time.

3 views0 comments

Recent Posts

See All